Box/Conduit Hangers

Erico Inc.ies line of combination box/conduit hangers is now expanded with the new CADDY B18CO hanger. This hanger supports multiple runs of conduit on either side of the junction box. The hanger eliminates conduit bending and extra fasteners in beam applications and requires 66% less drop wire for rod and wire applications. The factory-riveted assembly features a pre-riveted center hole and two additional holes, allowing for additional conduit clips to be attached in field assembly. With shop box assembled to the bar, field installation to beam requires only a hammer. Or, it can be snapped without tools onto drop wire. The conduit then can be installed in the box, and conduit clips are snapped closed. For multiple run support, assemble the conduit clips onto the hanger. This product is suitable for beam, drop wire or rod, threaded rod to beam, and threaded rod to beam perpendicular assemblies.

<%=company%>, 34600 Solon Rd., Solon, OH 44139. Tel: 440-248-0100; Fax: 440-248-0723.