WireScope 155 Cat5E Cable Tester
The first 155 MHz cable analyzer to fully qualify Category 5 cabling
for extended frequency range employed by 155 Mbps ATM equipment.
WireScope 155 Features:
- Tests installed cabling for compliance with TIA 568A Category 5,
Category 5E and ISO 11801 Class D specifications. Fully implements TIA
TSB-67 requirements, including laboratory-grade level II and level IIE
measurement accuracy for basic link and channel.
- Incorporates the new cabling measurements ELFEXT, Return Loss, Delay
Skew, and Power Sum that are required by the Category 5E and 1000Base-T
specifications.
- The first 155 MHz cable analyzer to fully qualify Category 5 cabling
for extended frequency range employed by 155 Mbps ATM equipment.
- Unique Digital Spectrum Analysis (DSA) technology measures
network-specific channel response - Provides accurate pass/fail
qualification for 20 high speed networking standards in one simple autotest.
- Automatic setup for Basic Link and Channel test configurations -
Attaching test probes automatically configure the WireScope 155 for Basic
Link or Channel Pass/Fail limits.
- Auto-troubleshooting mode for failing cable runs - WireScope 155
identifies location and cause of probable error sources for quick problem
isolation and repairs.
- Simultaneous far end NEXT (Near End Crosstalk) testing with the
DualRemote 155. A single 14 second Autotest measures NEXT from both ends of
the cable, saving time and ensuring complete test coverage.
- Locally stores 500 cable test reports from multiple test sites.
Reports can be printed or uploaded to any Windows-based PC - Nonvolatile
memory protects test data without requiring battery power.
- Included ScopeDataPro software can run tests directly from a Windows
PC attached to the WireScope 155. Logs full frequency plots for all tested
cables when run in this mode.
- Optional Fiber SmartProbes provide loss and length testing for multimode and singlemode Fiber optic cable.